Shadow Box Assembly
-using only a hand held phillips head screwdriver

(CAN BE VIEWED BETTER ON DESKTOP OR TABLET)
1. loose install both sides to base with
screws and trim rings
using
pre-drilled holes.
2.now tighten only the right hand side
3. install shelf 1 and then a back plate
4. Install shelf 2 and then a back plate

The next two or not as easy but
do
not force
them just wiggle them

5. Install shelf 3 and then a backplate
6. Install shelf 4 and then the
remaining backplates.

Now tighten the left hand side screws
7. Holding the two sides tight - rotate
the box up.
8.Install the top - it should drop down
with a close fit to the sides-It is meant
to slide into the grooves on the side
panels , same as the back plates did.
Then install the four beauty rings and
screws.

I have provided two wall anchor bolts
that go in the holes shown. Also one
extra beauty ring in case one gets lost.
YOU CAN ALSO HAVE A THREE SHELF DISPLAY
BY ELIMINATING SHELF NO. 3 AND USING
DIFFERENT SLOTS.